If you've ever wondered whether it's possible to place a hot tub in the ground rather than on it, the simple answer is "Yes".
However, prior to recessing the hot tub into the ground, you must do some genuine preparations, as it is intended to be a permanent feature once installed. Prior to installing an in-ground hot tub, several factors must be considered, including drainage, maintenance, and accessibility. For instance, there will be times when it will rain heavily, and you do not want your hot tub to become a mud pool. As a result, pipes must be installed in concrete slabs to collect rainwater and spillage. Additionally, a proper drainage system is strongly recommended because your hot tub will eventually need to be drained.
Read more: Deck Building Tools: What You'll Need
You will need to give access to the hot tub's controller in the event of any damage or repair. Additionally, it would be beneficial to provide access to all four sides of the hot tub in the event of a leak. The entry should be large enough to accommodate an average-sized person who has to enter to change pumps or other mechanical components. Additionally, warm, moist areas provide an ideal habitat for rats and other rodents that may nibble on and destroy the installation's pipes and wirings. Once installed, an in-ground hot tub can be totally functional and pleasurable if all necessary planning and preparation are followed.
Before you start digging holes in the ground or remodeling your deck, you need first determine the size of your hot tub, which means you need to be certain of the exact width, length, and height of the tub before proceeding. The tub will require a hole to be dug that is large enough to accommodate it. The hole should be larger than the tub itself since, once the tub is placed, you will require at least three feet of access to the electrical wiring. It is also recommended that your hot tub is not level with your deck since it will make it easier to get in and out of the tub and it will prevent children or animals from accidentally falling into the water. This also makes it possible for the tub cover to be placed over the tub while it is not in use. Before laying the foundation for the hot tub, the following step is to guarantee that the electric installation is done safely through conduit pipes.
Furthermore, an appropriate drainage system is required. Drains should be installed in two locations: one to collect spillage and rainwater in order to prevent flooding and damage to hot tub installations, and another to be used when draining water from the hot tub. Following that, you must guarantee that the framework can hold the weight of the hot tub when it is fully loaded with water. Once again, the ideal solution is a concrete slab that must be linked through with copper wiring in order to prevent the concrete from degrading over time. The slab should be at least four inches thick to be effective. Finally, you must ensure that you have complete access to all four sides of the hot tub in case any repairs are required to the control panel, piping, or other hot tub components. Maintenance work on the hot tub can normally be done in a 4' by 4' area, which is usually enough space for one person. You will need to construct a detachable panel measuring 4'x4' that will be supported at each corner. The panel is framed with a double rim with trusses spaced 16 inches apart. Install the decking over the framing in the same direction as the deck floor, starting at the bottom and working your way up. Install latches or hinges to hold the panel in place against the deck's floor. Check to see that the hatch is secure and that it is level with the deck floor.
You must keep in mind that in-ground installation is a permanent part of your backyard landscape; however, if done correctly, you will not be disappointed, I am confident.
#decking #tanzitestondecks #deckingideas #tanzanitedeck #deckstyles #outdoorstonedecks #outdoorlivingideas #deckdesign #Hottubdecks